Interface
: select a right interface type from the options provided. The device then can
automatically search the signal and starts to encode.
Resolution
: signal source resolution,
read-only.
Video Bit rate
: adjust in range of 1.000~19.000 Mbps.
Rate Mode
: this unit user
can choose CBR or VBR. User can also adjust values of rest items (H.264 profile, H.264 level,
Brightness: 0-128 & Contrast: 0-255 & Saturation: 0-128; Hue: -128 - +127)
5
) Audio Bit rate: Select audio bit rate from the options provided. Different audio format has
different bit-rate range. See specification table for details.
Audio Format: Select audio format among MPEG2, MPEG2-AAC and MPEG4-AAC.
6
) Program Information: User can enter the sub-menus to edit the
Program Name, Provider
Name
,
Service ID,
and PIDs of
PMT, PCR
,
Video
and
Audio
.
7
) RF On: User can choose to turn on or turn off the RF under this menu.
8)
Bandwidth: Choose between 6M, 7M and 8M.
9
) Constellation: DVB-T modulator contains 3 constellation modes: 64 QAM, QPSK and 16
QAM.
10
) FFT (Transmission Mode): Select between 2K and 8K.
11
) Guard Interval: Select among 1/32, 1/16, 1/8 and 1/4.
12
) FEC: It refers to Forward Error Correction rate. It contains 1/2, 2/3, 3/4, 5/6 and 7/8.
Ø
NOTE
: The different combination of bandwidth, constellation, guard interval and code
rate (FEC) will form a different output code rate. Please refer to appendix table 2.
13
) RF Frequency: Adjust it at range of 30 to 999 MHz. Set it according your regional situation
or inquire your local services.
14
) RF Level: Adjust it at range of -16~ -36dBm.
15
) TSID: (Transport Stream ID) User can view or adjust after enter this menu.
16
) ONID: (Original Network ID)-User can view or adjust after enter this menu.
17
) NIT: (Network Information Table) NIT table is a very important table for describing
the
network and TS. User can enter the submenus displayed and edit the values or select modes.
18) – 23)
Please refer to
Chapter 5
for details.
24
) IP Address: To configure IP address here.
25
) Subnet Mask: To configure subnet mask here.
26
) Gateway: To configure gateway here.
27
) Web Port: To configure web port here.
28
) MAC Address: To view MAC address here.
13
