Chapter 6 Operations of Web-server
In addition to using front buttons to control the encoder modulator and USB device, users
can also perform the same operation in an easier way with the web Brower in the PC
(Personal Computer).
Login
The default IP address of this device is 192.168.0.136. (We can modify the IP through the
Front panel.)
Connect the PC and the encoder modulator with a net cable, and use ping command to
confirm they are on the same network segment.
I.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx
can be 1 to 254 except 252 to avoid IP conflict).
Use web browser to connect the device with PC by inputting the device’s IP address in the
browser’s address bar and press Enter
It will display the Login interface as Figure-1. Input the Username and Password (Both the
default Username and Password are “admin” ) and then click “LOGIN” to start the device
setting.
Figure-1
