Chapter 5 Operations of Record TS and Play TS
through USB Disk
The FUTV4658 encoder modulator has functions of:
1.
*.ts Video Creation
See Chapter 3.
2.
TS Record and Save
Record mode select
▼
Main Menu
USB Device
USB Device
Record TS
Record TS
Record Start
Record TS
Advanced Config
►Single File
Segment File
Loop Record
Advanced Config
File name
File size
Data Mode
Start Record
Stop Record
1) Connect the signal source, enter “Record Start” and then choose one record
mode to start recording the encoded TS. And, press UP key and then Enter key to stop recording.
There are 3 record modes provided:
l
“Single file”: For example, when the file size is set as 1000M and the *.ts is recorded
up to 1000M, it automatically stops recording TS.
l
“Segment file”: For example, when the file size is set as 1000M and the *.ts is recorded up
to 1000M, it automatically saves the files and continues to record TS and
save it to next file until the USB memory is full.
l
“Loop record”: It automatically saves the files and continues to record TS and save it
to next file. When the USB memory is full, it replaces the previous file.
2) Advanced Config:
File Name: Users can enter this menu to edit name for the *.ts files to be recorded. For
example, if users name it “Record-”, it will give name to the saved *.ts files
“Record-001.ts”, “Record-002.ts” “Record-00N.ts”.
File Size: users can set the file size for the *.ts to be recorded. A single file can be
maximum 2047M in size.
Data Mode: There are 3 data modes:
15
