Operation Manual EMGZ 490
15.12.2015
6
2
Product Description
2.1
Product Range
The tension amplifier EMGZ 490 series is available in three different housing options.
●
EMGZ 490.R DIN-rail mount housing
●
EMGZ 490.Ro DIN-rail mount open version
●
EMGZ 490.W Wall mount housing
For detailed information about the mechanical dimensions refer to the outline drawings
in chapter 9.
2.2
Block Diagram EMGZ 490
Fig. 1: Block Diagram EMGZ 490 force measuring amplifier
E490004e
2.3
System Description EMGZ 490
The microprocessor-controlled amplifiers of EMGZ 490 series are used to amplify,
process and transmit force sensor signals to devices connected in a suitable network.
The measured force values are accessible via the PROFINET bus and on an analog
voltage output. The amplifiers are suitable for tension measurement with all FMS force
sensors. Either one or two sensors can be connected to one amplifier.
Device information, parameters or system settings can be accessed via a web browser.
Offset compensation and calibration of the system is realized through the web browser
which allows you to adjust the amplifier to the most demanding system requirements.
