OPERATING INSTRUCTIONS
Read all instructions and warning prior to operating the appliance.
Ensure that all controls are in the
position before plugging the appliance in to a properly grounded
electrical outlet.
The main control panel is located behind the cover at the top right corner on the front (see Figure 1).
Control Panel
Figure 1
This heater is for use on 120 Volts. The heater has a 3-prong grounded plug (Figure 2.A). If your electrical outlet
has only 2 slots (Figure 2.B), you will have to use an adapter (Figure 2.C) to convert from the 3-prong power cord
to a 2-slot receptacle. The green grounding plug extending from the adapter must be securely connected to a
permanent ground such as a properly grounded outlet box. The adapter should only be used if a proper 3-slot
receptacle is not available.
NOTE:
Adapters are not allowed for use in Canada.
Figure 2
A 15 AMP circuit is required to operate this appliance. If the breaker trips when the appliance is running, you may
need to move the appliance to another location or unplug other appliances that are on the same circuit.
4
