www.fmiproducts.com
125024-01A
18
4
INSTALLATION
Continued
2. Place left bottom log (#2) onto base as-
sembly as shown in Figure 21. See detail
in drawing for contour on bottom of log.
Log will fit over metal brackets and flat
onto base assembly
3. Place right bottom log (#3) onto pan
burner as shown in Figure 21.
4. Place front log (#4) on top of left and
right bottom logs as shown in Figure 22.
Notches in bottom of log #4 will fit over
ribs in logs #2 and #3.
Figure 21 - Installing Logs #2 and #3
Bottom of
Log #2
Figure 22 - Installing Log #4
Rib
5. Place top left log (#5) onto rear log (#1) and
front log (#3). Match round peg on bottom
of top left log (#5) with round hole in front
log (#3) and square hole in log #5 with
square peg on log #1 (see Figure 23).
6. Place top middle log (#6) onto rear log (#1)
and front log (#3). Match square peg on
bottom of log #6 with square hole on log
#4 and round hole on log #6 with peg on
log #1 (see Figure 24).
7. Place top right log (#7) onto top middle
log #6 and front log (#3) matching peg on
bottom of top right log #7 with hole on top
middle log #6 and hole in top right log #7
with peg on front log (#3) (see Figure 24).
Figure 23 - Installing Log #5
Figure 24 - Installing Logs #6 and #7
2
3
6
7
5
f i r e - p a r t s . c o m