ENGLISH
6
2.5 Repair and Service
- Attention!
Only qualified electricians may serve, repair, and replace this heater's parts
(see page 18).
Attention!
The heater must be installed in a horizontal position only. Never install your
device with an angle greater than 5 °. In case of operations in angles larger than 5º, the
heating loop wire may fall into disuse shortly.
3. INSTALLATION INSTRUCTIONS
3.1 Installation Position Warning
ECONAT C-15 heaters use infrared energy to transmit heat directly into the objects and
people. Unlike forced-air or convective baseboard systems, ECONAT C-15 infrared heat is
radiated onto an object. That heat is absorbed only by that object. The air is not heated,
and the heat will not migrate to the objects you don't want to heat. Along those same lines,
unless you position your heater correctly, it will not perform as expected. Its energy will be
diminished.
- Position your heater so that it warms your work/living area, not the air above or below it
3.2 Right and Wrong Installations Positions
WRONG
WRONG
RIGHT
