FMC Technologies Smith Meter microFlow.net Gas Operation Manual Download Page 30

Page: 30 / 34

Issue/Rev. 0.0 (2/10)

MNFG003 • Page 26

Section V – Diagnostics

Press Clear to return to the Ultrasonic Data Diagnostic Menu.

Profile

– Indicates current meter profiles

Press Clear to return to the Ultrasonic Data Diagnostic Menu.

Line Cond.

– Indicates current temperature and pressure

Press Clear to return to the Ultrasonic Data Diagnostic Menu.

Alarms

– Indicates current meter alarms; if no alarms are present the display will indicate:

Alarms available:

HIGH_FLOW
ELECTRONICS FAILURE
TRANSDUCER FAILURE
CALCULATION ERROR
SIGNAL LOW ALARM
GAIN ERROR ALARM
VOS DIFFERENCE ALARM
PATH SUBSTITUTION ALARM
PARAMETER ERROR
SOUND TO NOISE RATIO LOW
HIGH TURBULENCE ALARM
PROFILE DEVIANCE ALARM

Press Clear to return to the Ultrasonic Data Diagnostic Menu.
Press Clear to return to the Diagnostic Menu.

Contrast Adjust

This diagnostics menu provides for adjusting the display contrast.

Press CLEAR to return to the Diagnostics Menu.
Press CLEAR to return to the Main Menu.

Profile

Flatness

00000000

Symmetry

00000000

Swirl

00000000

Cross

00000000

Line Cond.

Temperature

XXX.XX

Pressure

XXXXX.XX

Alarms

--> No Alarms Present

Screen Contrast Adjustment

Press Up/Down Arrows to adjust contrast

Summary of Contents for Smith Meter microFlow.net Gas



































Search results

Summary of Contents for Smith Meter microFlow.net Gas

Reviews:

Related manuals for Smith Meter microFlow.net Gas

Brands by name

Popular brands

FMC Technologies Smith Meter microFlow.net Gas, Operation Manual

Search results

Summary of Contents for Smith Meter microFlow.net Gas

Reviews:

Related manuals for Smith Meter microFlow.net Gas

Brands by name

Popular brands