manualshive.com logo in svg

FMC Technologies Smith Meter AccuLoad II, Operator'S Manual

Share
Download
FMC Technologies Smith Meter AccuLoad II Operator'S Manual Download Page 25

Section III - Dynamic Displays

20

MN06065 Rev. 0.3 (8/97)

08 - Meter Factor

The current meter factor of the product requested
being used to correct the raw volume to the gross
volume will be displayed.

Meter Factor  = 1.0376

09 - Temperature Correction

The current correction for temperature on liquid
factor being used to correct the gross volume to the
gross @ standard temperature volume of the prod-
uct requested will be displayed.

CTL      = 0.9927

10 - Correction for Pressure on Liquid

The current correction factor being used to correct
the Gst (Gross @ Standard Temperature) volume to
a net volume based on the current pressure of the
product requested will be displayed.

CPL     = 1.0110

11 - Raw Non-resettable Volumes

The raw non-resettable volume for the product re-
quested will be displayed.

Raw Total  000009709

12 - Gross Non-resettable Volumes

The gross non-resettable volume for the product re-
quested will be displayed.

Grs Total   000009002

13 - Gross @ Standard Temperature Non-
resettable Volumes

The gross @ standard temperature non-resettable
volume for the product requested will be displayed.

Gst Total   000008875

14 - Net Non-resettable Volumes

The net non-resettable volume for the product re-
quested will be displayed.

Net Total   000008388

15 - Mass Non-resettable Totals

The mass non-resettable total for the product re-
quested will be displayed.

Mas Total   000053007

16 - Load Average Temperature

The load average temperature of the product re-
quested for the current transaction will be displayed.

Load Avg Temp  + 75.0

°

F

17 - Load Average Pressure

The load average pressure of the product requested
for the current transaction will be displayed.

Ld Avg Pres  43.0 Psi

Summary of Contents for Smith Meter AccuLoad II






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands