manualshive.com logo in svg

FMC Technologies Smith Meter AccuLoad II, Operator'S Manual

Share
Download
FMC Technologies Smith Meter AccuLoad II Operator'S Manual Download Page 21

Section III - Dynamic Displays

16

MN06065 Rev. 0.3 (8/97)

Dynamic Display Reference (System)

00 - Time & Date

The current time and date will be displayed.

9:20:05 AM 10-10-92

01 - System Flow Rate (Units/Min)

The current system flow rate of the recipe requested
in units per minute will be displayed.

Note: An "*" in front of the flow rate indicates the flow is being con-
trolled lower than selected because back pressure or auto flow
control is not sufficient to maintain the desired flow.

Flow = 1000.0 Gal/Min

Note: + or - means that the flow rate has been adjusted upward (+)
or downward (-).

02 - System Flow Rate (Units/Hr)

The current system flow rate of the recipe requested
in units per hour will be displayed.

Note: An "*" in front of the flow rate indicates the flow is being con-
trolled lower than selected because back pressure or auto flow
control is not sufficient to maintain the desired flow.

Flow = 60000.0 Gal/Hr

Note: + or - means that the flow rate has been adjusted upward (+)
or downward (-).

03 - Current Recipe

The recipe that is currently being loaded will be dis-
played:

Current Recipe=Midgrade

04 - Current Products

The products that are currently being loaded will be
displayed.

Current Products 1 2 3 4

05 - Injector #1 Volume

The additive injector #1 non-resettable totals will be
displayed.

Add 1 =  0000121555 Oz

06 - Injector #2 Volume

The additive injector #2 non-resettable totals will be
displayed.

Add 2 =   0000024260 Oz

07 - Injector #3 Volume

The additive injector #3 non-resettable totals will be
displayed.

Add 3 =  000004590 Oz

08 - Injector #4 Volume

The additive injector #4 non-resettable totals will be
displayed.

Add 4 =   000005540 Oz

Summary of Contents for Smith Meter AccuLoad II






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands