Bluemoon-EVB
Hardware V1.1.0
Chapter 6 Each Function Operation
MCU-UM-510106-E-10
– Page 26
6.2 EV Board Start-up
After system board start-up, it runs normal mode. Enter test mode or low power consumption
mode only from normal mode.
6.2.1 Start-up Display
The system power on, D4 will away light, D2 light last 2s, LCD display “FUJITSU” last 3s, As
Figure 6-1 shows.
Figure 6-1: Start-up Display
6.2.2 RTC Default Setting
The system start-
up from power shut, the RTC is set “2012-10-01” & “09:00:00”.
Figure 6-2: Display Time
Note: system reset, the RTC will save the current value.
D4
D2
