FMB MB9AA30N SERIES, User Manual

Page: 18 / 32

Bluemoon-EVB
Hardware V1.1.0
Chapter 5 Each Module Description
MCU-UM-510106-E-10
– Page 18
Table 5-1 collects the definition of the interfaces on Board.
Table 5-1: Definition of interfaces on Board
Number Port Designator Description Remarks
1 P1 serial port N/A
2 J3 DC power supply (9V) N/A
3 J2 USB DC 5V power supply N/A
4 J1 JTAG interface N/A
5 J4
Jumper, MCU Power selector. User can measure MCU
current used it N/A
6 J5
Jumper,serial programming selector(MCU mode pin). Do not
strobe J5 in any mode, except serial programming mode N/A
7 J6 Jumper, serial programming selector(Txd, strobe 2,3 pin) N/A
8 J7 Jumper, serial programming selector(Rxd, strobe 2,3 pin) N/A
9 J8 RTC calibration port N/A
10 BT2 Battery power supply N/A
11 U6 LCD N/A
12 D4 Power supply LED indication N/A
13 D2 MCU work LED indication N/A
14 SW1 Mechanical key, used MCU reset N/A
15 SW2 Mechanical key N/A
16 K1 TSC key N/A
17 SW3 Joystick N/A
Table 5-2 collects the definition of P1.
Table 5-2: Definition of P1
Pin Description Remarks
1 NC N/A
2 Txd, EVB send data N/A
3 Rxd, EVB receive data N/A
4 NC N/A
5 GND N/A
6 NC N/A
7 NC N/A
8 NC N/A
9 NC N/A