FMB MB9AA30N SERIES User Manual Download Page 2

Bluemoon-EVB

 Hardware V1.1.0 

Revision History 

MCU-UM-510106-E-10 

– Page 2 

Revision History 

Version 

Date 

Updated by 

Approved by 

Modifications 

1.0.0 

2012-10-29 

Abel Ma 

 

First Draft 

1.1.0 

2012-11-26 

Abel Ma 

 

Modify chapter 7 

Modify format about note 

 

 

 

 

 

 

This manual contains 32 pages. 

 

 

 

 

 

 

 

 

 

 

Copyright © 2012 

Fujitsu Semiconductor Design (Chengdu) Co., Ltd.

 All rights reserved.

 

Specifications are subject to change without notice. For further information please contact each office. 
 

All Rights Reserved. 

The contents of this document are subject to change without notice. 
Customers are advised to consult with sales representatives before ordering. 
The information, such as descriptions of function and application circuit examples, in this document are presented solely 
for the purpose of reference to show examples of operations and uses of FUJITSU SEMICONDUCTOR device; FUJITSU 
SEMICONDUCTOR does not warrant proper operation of the device with respect to use based on such information. When 
you  develop  equipment  incorporating  the device  based  on  such information,  you  must  assume  any  responsibility  arising 
out of such use of the information. 
FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of the use of the information. 
Any  information  in  this document,  including descriptions  of  function  and  schematic  diagrams,  shall  not  be  construed  as 
license  of  the  use  or  exercise  of  any  intellectual  property  right,  such  as  patent  right  or  copyright,  or  any  other  right  of 
FUJITSU  SEMICONDUCTOR  or  any  third  party  or  does  FUJITSU  SEMICONDUCTOR  warrant  non-infringement  of 
any  third-party's  intellectual  property  right  or  other  right  by  using  such  information.  FUJITSU  SEMICONDUCTOR 
assumes  no  liability  for  any  infringement  of  the  intellectual  property  rights  or  other  rights  of  third  parties  which  would 
result from the use of information contained herein. 
The  products  described  in  this  document  are  designed,  developed  and  manufactured  as  contemplated  for  general  use, 
including  without  limitation,  ordinary  industrial  use,  general  office  use,  personal  use,  and  household  use,  but  are  not 
designed,  developed  and  manufactured  as  contemplated  (1)  for  use  accompanying  fatal  risks  or  dangers  that,  unless 
extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, 
severe  physical  damage  or  other  loss  (i.e.,  nuclear  reaction  control  in  nuclear  facility,  aircraft  flight  control,  air  traffic 
control,  mass  transport  control,  medical  life  support  system,  missile  launch  control  in  weapon  system),  or  (2)  for  use 
requiring extremely high reliability (i.e., submersible repeater and artificial satellite). 
Please  note  that  FUJITSU  SEMICONDUCTOR  will  not  be  liable  against  you  and/or  any  third  party  for  any  claims  or 
damages arising in connection with above-mentioned uses of the products. 
Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such 
failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and 
prevention of over-current levels and other abnormal operating conditions. 
Exportation/release of any products described in this document may require necessary procedures in accordance with the 
regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. 
The company names and brand names herein are the trademarks or registered trademarks of their respective owners.

 

Summary of Contents for MB9AA30N SERIES

































Reviews: