EN
55
EN
54
P
A
C
K
IN
G
U
P
Attach the Safety Leash to a
suitable object (e.g. a post or a
board tightly buried in the sand).
Walk to the kite and secure it as
described in “Securing the kite“.
07 PACKING UP
A Flysurfer kite can be packed into its
bag very quickly. It is important that
the bridle is securely packed inside
the kite and the bar never gets into
or goes through the bridle lines.
Open the deflate valves.
Wind the lines round the bar until
you get to the mixer. Secure the lines
with the elastics or a half hitch. Keep
hold of the bar, or put it down some-
where out of the way of the bridle lines.
Fold the kite in half along the
middle (tip on tip) and make sure
that the bridle is inside both halves.
Also make sure that there are no
bridle lines over the outside skin.
Lay the bar on-top of the kite and
a bit of the way in from the tips.
Throw the bridle lines in between
the two halves of the folded kite.
Roll up the kite around the bar.
Make sure that no sharp objects
on the beach damage the cloth.
Close the deflate valves careful-
ly and fold the kite on both sides of
the bar and put it in the kitebag.
Tip:
If you do not want to roll
a wet bar into your kite, the-
re is a method to attach the
bar to the outside of the bag.
Fold the kite in the middle
(tip on tip) and then roll up
the kite, including the bridle,
and put it into the bag. Then
roll up the bar and attach it
to the outside of the bag.
When setting up the kite it is
recommended to then unroll
the bar first and then take
the kite out of the bag.
Summary of Contents for VIRON 2
Page 1: ...GEAR GUIDE ...
