INSTRUCTION MANUAL
-6-
JETIBOX
MAGNETIC
SWITCH
POWER
OUTPUT
MAXBEC2D
EXT.
UOUT
+
-
Batt. A
Batt. B
3.2.2
Connecting the MAXBEC2D to a DUPLEX receiver
Connect the MAXBEC2D to the receiver using the red JR connector from the
MAXBEC2D. Plug this into the socket marked 'Ext.' on the Duplex receiver.
Connect
the supply battery to the MAXBEC2D, not forgetting to connect the power output of
the MAXBEC2D to your receiver!
Now the JETIBOX can be connected to your
transmitter module for programming and monitoring of the system. Switch on your
transmitter and then use the magnetic key to switch-on the MAXBEC2D.
DUPLEX
Receiver
EXT.
SERVOS
DUPLEX
Sender
JETIBOX
MAXBEC2D
EXT.
UOUT
Batt. A
Batt. B
POWER
OUTPUT
from
MAXBEC2D
+
-
MAGNETIC
SWITCH
3.2.3
Connecting MAXBEC2D to a DUPLEX Expander
Connect the MAXBEC2D to the Expander using the red JR connector from the
MAXBEC2D. Plug this into any of the sockets on the Duplex Expander. Connect the
Expander to the Duplex Receiver into the socket marked 'Ext.'.
Do not forget to connect
the MAXBEC2D to the receiver.
Connect the power-supply battery to the MAXBEC2D
and connect the JETIBOX to the Transmitter module and switch-on the transmitter. The
MAXBEC2D can now be switched-on using the magnetic key.
DUPLEX
Receiver
EXT.
SERVOS
EXPANDER
E4
1.sensor
4.sensor . . . .
DUPLEX
Sender
JETIBOX
MAXBEC2D
EXT.
UOUT
Batt. A
Batt. B
+
-
POWER
OUTPUT
from
MAXBEC2D
MAGNETIC
SWITCH
