INSTRUCTION MANUAL
-7-
4.
Menu navigation
For parameter setting and monitoring of the MAXBEC2D, the JETIBOX is used. After connecting
the JETIBOX according to the above instructions, the screen shows the identification of the unit, the
temperature and the voltage of each supply battery. The active power-supply input is marked by a "*"
character.
By pressing the 'D' (Down) button on the JETIBOX, we enter the menu for the MAXBEC2D.
4.1
ACTUAL VALUE
MAXBEC MENU:
Actual Value
–
By pressing the 'D' (Down) button of the JETIBOX, we can
view the actual measured values.
Acc. Input Volt
– Shows the actual voltage of the power-supply batteries A and B.
Temperature
– Shows the temperature of the MAXBEC2D.
Output voltage
–
Shows the actual voltage being output by the MAXBEC2D.
4.2
MIN / MAX – Minimum and Maximum Values
MAXBEC MENU:
MIN / MAX
- By pressing the 'D' (Down) button, we can view the extremes
of temperature and voltage. Please note that these values are deleted automatically or can be
deleted manually using the “Erase Data” menu option. The values are automatically erased
when the unit is switched on and the input voltages exceed those specified in the Trigger Level
menu option.
Accum. A MIN/MAX
– Shows the minimum and maximum voltage of the battery connected to
input A
Accum. B MIN/MAX
– Shows the minimum and maximum voltage of the battery connected to
input B
Temp. MIN/MAX
– Shows the minimum and maximum temperature of the MAXBEC2D.
4.3
SETTING - Configuration Options
MAXBEC MENU:
SETTING
–
By pressing the 'D' (Down) button, we can see the individual
parameter settings of the MAXBEC2D.
Erase Data
–
By simultaneously pressing the Left and Right button of the JETIBOX, all
minimum and maximum recorded values are erased (See also section
“MIN / MAX – Minimum
and Maximum Values”
)
Trigger level
– Set the voltage values, the first overshoot of which, the previously recorded
minimum and maximum values are erased and recording begins again (See also section
“MIN /
MAX – Minimum and Maximum Values”)
Output (x.x) Volt
–
Set the output voltage of the MAXBEC2D. Note
that the output voltage of
the MAXBEC2D can be “set by jumper” or programmed using the JETIBOX.
By
pushing the 'L' (Left) button, the MAXBEC2D can be configured purely by Jumper. By
