background image

Husqvarna AB

561 82

Huskvarna

Sweden

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.

Copyright © 2008 Flymo S.A. All rights reserved.  Flymo® and other product and feature names are registered or unregistered trademarks

of Flymo S.A.

5760174 -01

Husqvarna AB, 561 82, Huskvarna, Sweden

Declare under our sole responsibility that the product(s);

Category............................Electric Lawn Trimmer
Type(s)

............................SET250, SET300

Identification of Series.......See Product Rating Label
Year of Construction..........See Product Rating Label

Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC,  2004/108/EC,  2000/14/EC
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-91, EN786, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3

The maximum A weighted sound pressure level L

pA

at the operator’s position, recorded on a sample of the above prod-

uct(s) corresponds to the Level given in the table.

The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above
product(s) corresponds to the Value ah given in the table.

2000/14/EC: The Measured Sound Power L

WA

& Guaranteed Sound Power L

WA

values are according to the tabulated figures.

Conformity Assessment Procedure...............

Annex VI

Notified Body.................................................

Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England

Newton Aycliffe  05/02/2010
M.Bowden
Research & Development Director
Husqvarna UK Ltd.
Keeper of technical documentation

EC Declaration of Conformity

Type

Width of Cut (cm)

Speed of Rotation of Cutting Device (rpm)

Power (kW)

Measured Sound Power L

WA

(dB(A))

Guaranteed Sound Power L

WA

(dB(A))

Level (dB(A))

Uncertainty (dB(A))

Value ah (m/s

2

)

Uncertainty K of ah (m/s

2

)

Weight (Kg)

SET300

30

10,300

0.7

95

96

81.4

2.5

5.06

1.5

3.45

SET250

25

10,500

0.5

92

96
77

2.5

2.92

1.5

3.26

Summary of Contents for Power Trim SET250










Reviews: