Carton Contents
IMPORTANT !
Please check the contents of the carton are correct BEFORE assembling your new product.
IF ANY PARTS ARE MISSING CONTACT:-
Husqvarna UK Ltd. Customer Service Department direct
Telephone : 0844 844 4558 UK
1800 882 350 ROI
Fax : 01325 302530
Safety
If not used properly this product can be dangerous! This product can cause serious injury to the operator
and others, the warnings and safety instructions must be followed to ensure reasonable safety and effi-
ciency in using this product. The operator is responsible for following the warning and safety instructions
in this manual and on the product.
Explanation of Symbols on your product
Warning.
Read the user instructions carefully
to make sure you understand all the
controls and what they do.
Always wear eye and hearing protection.
Switch off! Remove battery pack before
maintenance or cleaning.
Do not use in the rain or leave the product
outdoors while raining.
Warning - Risk of fire, do not short
battery terminals
instruction
manual
blade cover
Battery Pack
Charger
Rear Switch
Lever
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term ‘“power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adaptor plugs
with earthed (grounded) power tools.
Unmodified
plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrigera-
tors.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
electric shock.
d) Do not abuse the cord. Never use the cord for carry-
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of elec-
tric shock.
Rear Handle
Front Switch
Lever
Front Handle
