Fault Finding Hints
Cutting blade stops under load
1. Cut at a slower pace.
2. Recharge Battery.
3. If cutting blade still stops under load?
Immediately remove the Battery Pack and consult
your local approved Service Centre.
Fails to stop when one switch lever is released.
Immediately remove the Battery Pack and consult
your local approved Service Centre.
Poor cut quality
1. Ensure the product is being used correctly (see
How to Use)
2. Ensure blades are free from trapped debris
3. Damaged Blades?
Immediately remove the Battery Pack and consult
your local approved Service Centre.
Excessive Vibration
Immediately remove the Battery Pack and consult
your local approved Service Centre.
• Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for dis-
posal information.
BATTERY DISPOSAL
• This product contains a NiMH battery and should
not be discarded with normal household waste at
the end of its life.
• The battery must be removed from the product be-
fore disposal
• The battery should be disposed of safely.
• Do NOT dispose of battery to water.
• NiMH batteries can be harmful and should be dis-
posed of through the recognised recycling facility
in accordance with European Regulation
• Do NOT incinerate
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for
the environment and human health, which could oth-
erwise be caused by inappropriate waste handling of
this product.
For more detailed information about recycling of this
product, please contact your local council office, your
household waste disposal service or the shop where
you purchased the product.
If any part is found to be defective due to faulty manufacture
within the guarantee period, Husqvarna UK Ltd., through its
Authorised Service Repairers will effect the repair or replace-
ment to the customer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not au-
thorised by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used outside of the coun-
try for which it was specified.
(i) The machine has not been used commercially.
*
This guarantee is additional to, and in no way diminishes
the customers statutory rights.
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
Failures not covered by guarantee
* Replacing worn or damaged blades
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accor-
dance with the instructions and recommendations
contained in this Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing
parts and their life is dependent on regular mainte-
nance and are, therefore not normally subject to a
valid warranty claim: Blades.
* Caution!
Husqvarna UK Ltd. does not accept liability under the
warranty for defects caused in whole or part, directly
or indirectly by the fitting of replacement parts or addi-
tional parts that are not either manufactured or ap-
proved by Husqvarna UK Ltd., or by the machine
having been modified in any way
Guarantee & Guarantee Policy
Environmental Information
Service Recommendations
1. We strongly recommend that your product is serviced
at least every twelve months, more often in a profes-
sional application.
2. Always use genuine Husqvarna Spare Parts.
3. Prepacked spares are available from most Husqvarna
UK Ltd. stockists.
4. Your product is uniquely identified by a silver and
black product rating label
5. If you have a problem with your machine contact your local
Approved Service Centre ensuring you have full details of
your product as described on the product rating label.
6. Should it be necessary for work to be carried out by your Serv-
ice Centre, it is important to take your complete machine in-
cluding cable and any extension cables used.
A network of specialist dealers can be found in your local Yel-
low Pages. To obtain service on your product simply tele-
phone or visit your local Service Centre. Should you require
service under the terms of our guarantee the Service Centre
will require proof of purchase.
All of the centres listed stock genuine Husqvarna Spare Parts.
NOTE: Our Service Repairers act on their own behalf and are
not empowered to commit or legally bind Husqvarna UK Ltd.
in any manner whatsoever.
