Flyer Upstreet6, Original Instruction Manual

Page: 178 / 271

12
5.5.17 Altitude calibration menu
You can correct the actual altitude in the altitude
calibration menu . Move the joystick up and down
to change the numbers . Move the joystick left and
right to switch between numbers .
Press the joystick to apply the new settings after
confirmation.
5.5.18 Torque sensor
In the calibration menu, you will find the menu
item “Torque sensor“ .
The sensor that measures the rider’s pedalling
force can be calibrated under the “Torque sensor”
menu item . It is only necessary to calibrate this
sensor if a corresponding message appears on
the display . Follow the instructions on the display
to perform the calibration . Follow the instructions
on the display to perform the calibration .
5.5.19 komoot navigation
The hard copy of the user manual may not be
consistent with the content on your smartphone .
Komoot continuously works to keep its app up-
to-date. We therefore reserve the right to publish
changes to the connection with komoot directly on
our website. You can find the latest version here:
www.flyer-bikes.com/navigation/
The outdoor navigation app komoot enables you
to use your FLYER e-bike as a navigation device.
This function is only available with the FLYER D1
display and in conjunction with a smartphone .
The procedure for starting up the app will differ
depending on whether you have an Android-ba-
sed smartphone or an iPhone .
Firstly the start-up sequence for Android smart-
phones will be shown below. The start-up sequen-
ce for iPhones is described in the next chapter .
Brief guide
1 . Install the komoot app on your smartphone and
create your own komoot account, either in the
app itself or online at www .komoot .de .
2 . Collect your komoot voucher code at
www.flyer-bikes.com/navigation/
3 . Activate komoot’s full range of maps using your
voucher code: www .komoot .de/g .
4 . Connect your FLYER e-bike to the komoot app
and enjoy your first tour with komoot.
5 . Please refer to section 5 .5 .19 onwards of the
user manual for more detailed information .
5.5.20 Heartrate
Your FLYER e-bike can be connected to a pulse mea-
suring device via Bluetooth . Follow the steps below
to activate the pulse function . This function is only
available in conjunction with the FLYER D1 display .
In the “Settings” menu, select the sub-menu
“Connectivity” by pressing the “OK” button .
In the “Connectivity” menu, select the sub-menu
“Heartrate” by pressing the “OK” button .