Flycam Swivel Assembly Manual Download Page 4

Page: 4 / 5

•

Then insert the bolt and tighten it properly
with the help of a 4mm Allen key.

•

Remove the handle and insert it into the
swivel.

•

Loosen the knob of the DJI Ronin handle

(Not Included).

•

After inserting into the swivel, insert the
handle.

•

Remove the bolts from the top plate of the
Flycam swivel with the help of a 4mm Allen
Key.

DJI Ronin Gimbal

(Not Included)

•

Tighten the handle properly, as shown in the
image.

Summary of Contents for Swivel

Page 1: ...All rights reserved No part of this document may be reproduced stored in a retrieval system or transmitted by any form or by any means electronic mechanical photo copying recording or otherwise except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher Flycam swivel Rod Allen Key 4mm 3 16mm 3mm Bush Ronin Adapter Plate ...

Page 2: ...help of a 4mm Allen key and insert the rod After tightening the bolt attach the end cap to the rod as shown in images Tighten the bolt of the Flycam swivel with a 4mm Allen Key Swivel Setup Remove the bolt of the Flycam swivel by loosening it with the help of a 3 16 mm Al len key ...

Page 3: ... screw bush by removing the handlebar Now separate the top part of the swivel Remove all the screw bush as shown in the image Then place the handlebars one by one on the Ronin plate Place the top plate of the next Flycam swivel on top As shown in the image ...

Page 4: ...nd insert it into the swivel Loosen the knob of the DJI Ronin handle Not Included After inserting into the swivel insert the handle Remove the bolts from the top plate of the Flycam swivel with the help of a 4mm Allen Key DJI Ronin Gimbal Not Included Tighten the handle properly as shown in the image ...