Flybox Vigilus, Operating Manual

Page: 18 / 92

Flybox
VIGILUS
-
Operating manual 18
®
Rev. 1.0
Egt setup menu
●
Alarm = ON/OFF:
enable/disable the alarm
(alert indication on display)
that occurs when a EGT
measurement exceeds the
red threshold (default=ON).
●
Voice = ON/OFF: enable/disable the audio alert notification on
EGT alarms (default=ON).
● Repeat: Set the number of times that the vocal alarm for the
EGT is repeated on the audio output (range:1~5, default=1).
●
Auto reset = ON/OFF: if set to ON, if a alarm condition is
activated but the measurement that activated this alarm has
dropped below the alarm threshold, the Vigilus automatically
reset the alarm indication. If set to OFF, the user must manually
reset the alarm indication, even if the measurement that
activated this alarm has dropped below the alarm threshold
(default=ON).
● Out map: you can choose to enable one of the four outputs
available on the remote module when the alarm is activated,
useful for example to turn on an alarm light on the cockpit.
Set to zero to disable this function (default=0).
●
Unit: °C / °F: Set the unit of measure for the EGT temperatures;
choose between °Celsius (°C) or °Fahrenheit (°F). Default=°C.
●
Filter: This parameter affect the readings and the gauges
displayed: a low value means that the readings will be more
fast and unfiltered (but subject to fluctuations), an high value
means that the readings will be more slow and stable (range:
0~999, default=100).
●
EGT ALARMS SUBMENU:
Instrument configuration