Flybox Vigilus, Operating Manual

Page: 77 / 92

VIGILUS
-
Operating manual
Flybox
77
Rev. 1.0
®
Vigilus continuously monitor all the sensors and when a
measurement exceed its setpoint the corresponding alarm is
activated (if enabled).
An alarm condition is indicated in this ways:
● A red flashing message appears on the bottom of the
display, as in this example:
●
One of the four programmable outputs of the remote module
is activated (if enabled).
●
Vocal alert on the audio output is activated (if enabled).
To reset any alarm condition press or rotate the knob or press
a button; in case of multiple alarms the alarm pages is presented
in sequence.
The possible alarm conditions are:
● “HIGH BATTERY VOLTAGE!”
●
“CAUTION! LOW BATTERY VOLTAGE”
●
“EGT 1~6 HIGH TEMPERATURE”
● “CHT 1~6 HIGH TEMPERATURE”
●
"HIGH FUEL PRESSURE!"
●
"CAUTION! LOW FUEL PRESSURE"
●
"HIGH OIL PRESSURE!"
Alarm
message
SECTION 3
3.1 ALARMS