Flybox Vigilus, Operating Manual

Page: 64 / 92

Flybox
VIGILUS
-
Operating manual 64
®
Rev. 1.0
Main engine data page
CAUTION : Before using the fuel level indications you must
be sure to have already set the following parameters:
- Set the unit of measure: US gallons or liters (set this before
all the other parameters). See parameter “Unit” on menu
Settings → Instruments → Fuel L → Tanks.
- Set the number of tanks used (see parameter “Number” on
menu Settings → Instruments → Fuel L → Tanks).
- Set the type of level sensors installed (see parameter “Sensor”
on menu Settings → Instruments → Fuel L → Tanks →
Left/Main/Right tank).
- Execute the calibration for each used tanks (see chap.1.5).
●
Highest & lowest EGT / CHT: on this window you can read
the numerical indication of the highest (denoted by “H”) and
lowest (denoted by “L”) EGT and CHT, with also the indication
of what cylinder is referred:
●
EGT / CHT bars: graphical representation of the EGT and CHT
temperature of every cylinder; the EGT are the green bars, the
CHT are the light blue bars. The highest EGT and CHT are
indicated by a red dot over the bars.
●
OAT: outside air temperature, with both graphical and
numerical indication in°Celsius or °Farhenheit, depending on
what unit of measure you have choosen in the settings.
● CAT: Airbox/carburetor air temperature, with both graphical
and numerical indication in°Celsius or °Farhenheit, depending
on what unit of measure you have choosen in the settings.