Omnia57
Fuel Comp
-
Installation and User Manual,
Safety Instructions and Warning Booklet
FLYBOX
Rev. 1.0
®
17
Instrument settings
CAUTION
:
Before using the
Omnia57 Fuel Comp
in flight
for the first time, you must set at least the following
parameters (as explained in the instructions on the
following pages):
●
Set the parameter “Eng” as explained in the chapter
4.4.1
●
Set the parameter “Space unit” as explained in the
chapter
4.5
●
Set the parameter “Qty unit” as explained in the
chapter
4.5
●
Set the parameter “Tank capacity” as explained in the
chapter
4.5
●
If you are using the RED-CUBE FT-60 flow sensor,
make sure the K factor is 68000.
●
If a fuel pressure sensor is installed, set all the
paramters in the “Fuel Pressure” Submenu.
●
Check if the indications are correct for all the enabled
gauges.
4.1 MINIMUM SETTINGS BEFORE FIRST USE
WARNING
:
In the absence of the above operations, or if
they are not performed correctly, you can not consider as
reliable the indications of the instrument.
INSTRUMENT SETTINGS
Summary of Contents for Omnia57 Series
Page 4: ...Examples of different screens ...
Page 64: ......
