Oblò / Oblò
-
A
/
P
(
Autopilot)
User’s manual
Flybox
92
Rev.3.7
®
HtoE enable (Hold to engage enable):
Enable (YES) or disable (NO) the function to engage
the autopilot when the button is pressed for 2 seconds.
The default value is “NO” so the remote button will only
serve to disengage the autopilot when already engaged.
HtoE mode (Hold to engage mode):
Select the autopilot engage mode using the remote
button (if enabled, see previous parameter). Set to
“HDG” to engage the autopilot in horizontal navigation
(roll), set to “ALT” to engage the autopilot in vertical
navigation (pitch), set to “HDG/ALT” to engage the
autopilot in both axes.
CWS enable (Control wheel steering enable):
Enable (YES) or disable (NO) the following auxiliary
function of the remote button:
during autopilot control, press and hold for more than 2
seconds the button (on the display will be displayed
“AP:CWS”) and fly to a new heading and/or altitude, then
release the button to reengage the autopilot.
By default this function is disabled.
•
•
•
Autopilot configuration
Autopilot setup menù
Summary of Contents for Oblo
