Oblò / Oblò
-
A
/
P
(
Autopilot)
User’s manual
Flybox
109
Rev.3.7
®
Autopilot operation
•
ENGAGE AUTOPILOT IN “HDG/TRK” MODE
(HEADING OR TRACKING HOLD/CHANGE):
- Once in flight and with Oblò already turned on, turn on
the ACU control unit via the ON/OFF switch.
- Choose between heading or tracking (press the knob
on the Oblò, turn it to select HDG or TRK and press
again).
- Trim the roll and pitch of the aircraft, if present.
- Press the “HDG/TRK” button on the ACU control unit
(led will turn on) or press for 2 seconds the remote
button (if installed and enabled as explained in
chap.6.3.4).
- Set the desired heading/tracking by rotating the
“HDG/TRK” knob on the ACU.
- If you press the HDG/TRK knob during an autopilot-
commanded turn, the autopilot will maintain the actual
heading/tracking (the heading/tracking bug is centered).
Details of operation
Summary of Contents for Oblo
