Oblò / Oblò
-
A
/
P
(
Autopilot)
User’s manual
Flybox
103
Rev.3.7
®
Autopilot operation
ALTITUDE BUG:
The altitude bug is a graphical representation on the
altimeter indicator, at the altitude that the autopilot must
maintain/reach. The bug can be set by turning the “ALT”
knob on the ACU control unit. While setting the altitude
with the “ALT” knob, it also appears a numeric window
to allow fine adjustment. This window automatically hide
after 3 seconds.
With autopilot turned on but not engaged the bug is
yellow, with autopilot engaged is magenta.
Numerical indication for bug
adjustment when autopilot is
engaged. Automatically hide
after 3 seconds.
Altitude bug:
with autopilot
engaged is in MAGENTA,
without
autopilot
is
in
YELLOW.
If the bug is set on an altitude outside the screen (higher
or lower than the values currently displayed by the
altitude tape), it appears a numerical indication with an
arrow pointing up or down:
•
Available indications
Summary of Contents for Oblo
