GOLD 95/115/130 OWNER’S MANUAL VER 10
©
Copyright by
FLY
Products
srl
Page
11
Mounting the prop is quick and easy:
Place the rear prop flange on the rear side of the prop
Insert the six (6) prop bolts through the rear prop flange
and prop
Place the front thickness flange between the propeller and
the reduction taking attention to fit the little centering hole
in the prop
Screw the bolts to the reduction drive and tighten them
evenly
The correct torque to use is 1 N m MAX
A more practical “field method” of torquing is to tighten
the bolts snuggly and evenly, but not enough to begin to
crush the wood of the prop
mounting the prop
The red arrow in picture, indicate the direction of propeller rotation
Assembly Inspection
It is critical to fully inspect the assembly of the
GOLD 95/115/130
to find and remedy any potential
problem areas before proceeding
The inspection should contain, at a minimum, the following items:
Review each assembly step above
Examine all nuts, bolts, and fasteners for security
Check the harness for correct mounting, that all straps are secure, that there are no twists on
any straps
Examine prop cage for correct assembly, that it is strong, the netting is tight and on the correct
side
Check that nothing can get in the prop The prop should clear the cage by same distance at all
points
Check the fuel tank and fuel delivery system
Check for correct mounting of prop, and correct torque of prop bolts
