Fly Dragon FDG30, User Manual

Page: 7 / 27

The ground station software will automatically connect to the aircraft and upload
aerial survey tasks; the aircraft status can be monitored in real time through the
aircraft indicator lights, the following table shows the aircraft status under different
indicator lights;
Light status Drone status Remark
Red light
flashes quickly Aircraft enters IMU calibration
Red light
Flashes slowly After the aircraft is calibrated,
enter the waiting position
Green light
flashes slowly The aircraft has been positioned
successfully, waiting to be
unlocked Unlock via UAV ground station
before takeoff
Green light flashes
quickly The aircraft is unlocked
successfully, waiting for takeoff The VTOL drone will automatically
take off after idling for 5 seconds
☆ hint:
If the connection fails, you can do the following to reconnect (try in sequence):
1) Manually select the serial port
2) Power on the aircraft and disconnect and reconnect the digital USB
3) Try to replace the data cable and restart the computer
4) Replace the computer (there are a small number of computers that cannot be
connected due to lack of system components or damage to system components,
you can try to replace the computer, or reinstall the system, please try to install
the genuine Windows system)
5) If the connection still fails, please contact the manufacturer