Start your vehicle (figure 4).
a. If after 3 seconds engine does
not start, turn key to OFF posi-
tion.
b. Detach the FLX8000 from the
clamps. Wait 60 seconds and
then follow steps 11-16. If prob-
lems still persist, please see the
Troubleshooting section in your
FLX8000 Owner's Manual for
other possible causes (figure 5).
After a successful start, quickly
3
5
4
Start
Vehicle
6
You are now able to drive your vehicle. You should be sure to run your vehicle
for at least 15 minutes before shutting it off again. If you have engaged the
emergency brake, disengage before driving your vehicle.
Operation Guide:
Press the on/off switch to activate the lights. The display as below shows the
level of power in relation to the number of lights illuminated.
The indicator lights will flash one by one when the unit is charging. A solid light
indicates a complete level of charge. For example, when 2 lights are illuminated
and a
third is blinking, that means the unit is between 40 -60% charged. Once the
third light stops blinking the unit is 60% charged.
•
•
•
13.
14.
15.
16.
Indicator Lights
The FLX8000 Jump Starter has 5 indicator lights to determine the amount of power in the unit.
Charging
20% 40% 60% 80% 100%
When all five light are lit, the unit is fully charged!
1. With the wall plug
2. With the car adaptor in your vehicle
Charging the FLX8000 Jump Starter
Your FLX8000 Jump Starter has two options for charging the unit:
