Make sure your FLX8000 is charged.
Be sure to hold the ON/OFF button for 3 seconds to activate the flashlight.
Charge your FLX8000. You should eventually see blinking indicator lights once the
FLX8000 has enough charge.
If the automotive devices are ignited when the battery capacity is low, the jump start-
er could fail to operate due to the inner chip safety protection function been activat-
ed. This can be re-activated and reset by charging the device.
Check that the charger is securely attached to the FLX8000 input port.
You may have a faulty outlet. Try plugging your FLX8000 charger into an alternate
outlet.
I connected my FLX8000 to the charger, but there are no indicator lights blinking.
I am unable to turn on the flashlight.
My FLX8000 will not power on.
•
•
•
•
•
•
•
Parts List
Description
FLX8000 Jump Starter Unit
Car Charger
2-in-1 USB Charging Cord
Spare parts are available for purchase at www.fluxamp.com
Quantity
1
1
1
Description
Wall Charger
User's Manual
Clamp
Quantity
1
1
1
Battery Size: 8000 mAh
mAh (milliampere-hour) - lt's simply a measure of battery capacity. The more mAh, the
more available power for your device.
Battery Type: High-power Type Lithium-ion
Lithium-ion - It's what makes your rechargeable battery tick (not literally!).
Quality li-ion battery cells provide long battery life and consistent performance.
Volts: 12V
Starting/Peak Current: 200A/400A
Max Input: 14V/1A
Max Output: 5V/2.1 A ×2
"A" (amperage or amps) - lt's the measure of current that runs from the battery pack to
your device (output) or from the outlet to the pack (input) - higher "A" means faster
charge (input) or discharge (output).
DC Charging Port: 1
Auto OFF: Yes
Indicator Lights: 5
Charging Cycles: up to 1000 times
We are talking full cycles (a full discharge).
FLX8000 Technical Specifications
