Flux F 457, Original Attachment

Page: 9 / 16

Attachment Commutator motors (without Ex-Protection) 9 / 16
ENGLI
SH
3 Technical specifications
Motor
Type
Kind of motor
Power con-
sumption
Voltage
Fre-
quency
Degree of pro-
tection/
Approval Protec-
tion
class
Weight
FEM
4070
Commutator
motor,
open-circuit
ventilated
450 W 100 V 50-60 Hz IP 24
II 2.4 kg
500 W
110 V
50 Hz
IP 24
230 V
IP 24
VDE, GS, EMC
240 V IP 24
F 457
Commutator
motor,
open-circuit
ventilated
700 W 100 V 50-60 Hz IP 24
II 4.0 kg
F 457
F 457 EL
800 W
110 V
50 Hz
IP 24
230 V
IP 24
VDE, GS, EMC
240 V IP 24
F 458
Commutator
motor, exter-
nally cooled
230 W 12 V
DC IP 55 III
5.1 kg
410 W 24 V
F 458 460 W
110 V
50 Hz
IP 55
I
230 V
IP 55
VDE, GS, EMC
240 V IP 55
F 458 EL 460 W 230 V
IP 55
VDE, GS, EMC
F 458-1 700 W
110 V IP 55
5.9 kg 230 V
IP 55
VDE, GS, EMC
240 V IP 55
Surrounding temperature -20°C to +40°C
4 Installation and Commissioning
Attention !

Motors with protection class I must only be used in mains with a
protective conductor.
>
Make sure that the supply voltage corresponds to the voltage indicated on the rating
plate.
> Place the motor on the pump.
Risk of injury!

Only operate the pump when the union nut between the pump
and the motor is tightened hand-tight.
> Immerse the pump vertically into the liquid and secure it in a vertical position by
the use of a barrel fitting or a screw clamp.
> Check the mains connection cable for damage before every use.
> Keep the mains connection cable away from solvents.
> Set the on/off switch to "0" (Stop) before connecting the mains plug.
> Connect or insert the mains plug.
> Start the motor.