15. Mount sensor unit onto the wall as illustrated in Figure(15)(16).Locate it on the side wall.
(See P.11 for instructions when using double sided tape for installation.)
Fig.15
Screw and Anchor Option
. See Figure(15)
z
Using a 1/4” drill bit, drill two holes in their proper positions.
z
Install the bracket on the wall. Secure with anchors and screws.(included)
z
Insert the sensor unit onto the bracket.(Place the sensor unit at the bottom of the bracket and slightly
push to fit in the bracket.) Secure it with two screws on the bottom of the sensor unit.
To locate correct position for sensor unit on side wall.See Figure (16).
Fig.16
Unit
Drill two holes
Bracket
Sensor Unit
W.L
