Installation Instructions
1. Close control stop.See Figure (1).
Fig.1
Fig.2
2. Remove the fill valve unit and its connecting pipe.See Figure(2).
(The flush valve unit remains in place)
3. Install the filter unit to the control stop .See Figure(3).
Fig.3
4. Assemble the fill valve unit and water connector as illustrated in Figure(4).
5. Lock the PVC tube to the water connector with a nut provided.See Figure(4)
6. Install the fill valve unit in the tank as illustrated
in Figure(5). Secure it with a nut provided.
Fig.5
Fig.4
Flush Valve Unit
Fill Valve Unit
Filter Unit
Nut
Nut
PVC Tube
Fill Valve Unit
Rubber Gasket
Rubber Gasket
Water Connector
5
