background image

15

Configuring the Test Set

System Timeout

The System Timeout function turns off the tester after 
a selected period of inactivity. After the test set turns 
off, you can turn it on by switching the Talk/Off/
Monitor switch to off then to either Talk or Monitor.

To set the system timeout period:

1

Set the slide switch to the Talk (

T

) or Monitor (

M

position.

2

From the Settings screen, highlight 

SYSTEM 

CONFIGURATION 

with the arrow keys, then press 

the 

SEL

 key, or press 

on the keypad.

3

Press 

SYSTEM TIMEOUT

.

4

Highlight the desired time with the arrow keys, 
then press the 

SEL

 key, or press one of the 

following keys on the keypad:

Speaker Timeout

The test set’s speaker uses more battery power than 
most other functions. To extend battery life, the 
Speaker Timeout function turns off the speaker after a 
selected period of inactivity. 

After the speaker turns off, you can turn it back on by 
pressing the 

SPKR

 button.

To set the speaker timeout period:

1

Set the slide switch to the Talk (

T

) or Monitor (

M

position.

2

From the Settings screen, highlight 

SYSTEM 

CONFIG 

with the arrow keys, then press the 

SEL

 

key, or press 

on the keypad.

3

Press 

SPKR TIMEOUT

.

4

Highlight the desired time with the arrow keys, 
then press the 

SEL

 key, or press one of the 

following keys on the keypad:

- 2 minutes (TS25D CO default)

- 5 minutes (TS25D default)

- 10 minutes

Data Lockout

The Data Lockout function is may be turned on or off. 
The default setting is 

ON

.

1

Set the slide switch to the Talk (

T

) or Monitor (

M

position.

2

From the Settings screen, highlight 

SYSTEM 

CONFIGURATION 

with the arrow keys, then press 

the 

SEL

 key, or press 

on the keypad.

3

Press 

DATA LOCKOUT

.

4

Highlight the desired setting with the arrow keys, 
then press the 

SEL

 key, or press 

1

 for 

ON 

or

 2 

for

 

OFF

.

When data lockout is set to 

OFF

, the test set will still 

detect data and will display 

DATA DETECTED

, but it will 

not lockout.

Firmware Version

To view current Firmware version:

1

Set the slide switch to the Talk (

T

) or Monitor (

M

position.

2

From the Settings screen, highlight 

SYSTEM 

CONFIG 

with arrow keys, then press the 

SEL

 key, or 

press 

on the keypad.

3

Use the Down arrow key to scroll down to 

VERSION

. Press 

for 

VERSION

. The version of 

software is displayed on the screen.

4

Use the 

BACK

 key to return to the previous menu.

TS25D

1

 - 30 minutes

2

 - 60 minutes (default)

3

 - Never

TS25D CO

1

 - 5 minutes (default)

2

 - 60 minutes

3

 - Never

Summary of Contents for TS 25D























Reviews: