manualshive.com logo in svg

Fluke Ti100, User Manual

The Fluke Ti100 User Manual is an essential companion for maximizing the potential of your thermal imager. Download this comprehensive manual for free from manualshive.com to learn how to effectively operate, troubleshoot, and calibrate your device. Unlock the full potential of your Fluke Ti100 with this detailed manual.

Share
Download
background image

 

Performance Series Thermal Imagers 

 

Menus 

 47 

CNX™ Wireless System 

The Imager supports the Fluke CNX™ Wireless System (may not be available 
in all regions). It can discover up to 10 3000 Series wireless tools up to 20 
meters away. From those 10, you can select 5 tools to view their live 
measurements on the Imager display. 
To discover a supported tool: 
1.  If not already on, turn on each wireless tool and make sure the wireless 

feature is enabled. See the documentation of each tool for more 
information about how to use. 

2.  Turn on the Imager.  
3. Push 

. 

4. Push 

/

 to highlight 

Camera

. 

5. Push 

 or 

 to view the menu. 

6. Push 

/

 to highlight 

CNX

. 

7. Push 

 or 

 to view the menu. 

8. Push 

/

 to highlight 

ON

. 

9. Push 

 or 

 start the discovery process. 

When done, the Imager presents a list with the ID and name of available 
tools found within the 20 m distance. 

10. Push 

/

 to highlight a tool name. 

11. Push 

 to select the tool. 

12.  Repeat steps 10 and 11 for each tool to show on the display. 
13. Push 

 when done. 

The labels change to include an Edit function. By default, the Imager 
shows and saves the data for the selected tools. If these settings are 
acceptable, push 

 to exit the CNX setup menu.  

Shop for Fluke products online at:

1.877.766.5412

www.

MyFlukeStore

.com

Summary of Contents for Ti100





































































Reviews:

No comments

Related manuals for Ti100

Brands by name

Popular brands

Load more brands