manualshive.com logo in svg

Fluke Ti100, User Manual

The Fluke Ti100 User Manual is an essential companion for maximizing the potential of your thermal imager. Download this comprehensive manual for free from manualshive.com to learn how to effectively operate, troubleshoot, and calibrate your device. Unlock the full potential of your Fluke Ti100 with this detailed manual.

Share
Download
background image

 

Performance Series Thermal Imagers 

 

Menus 

 39 

Set Low-Temperature/Dew Point Color Alarm 

To set a low-temperature/dew point color alarm: 

1. From 

the 

Color Alarm

 menu, push 

/

 to highlight 

Set Low 

Alarm

. 

2. Push 

 to open the Color Alarm menu. 

3. Push 

/

 to adjust the temperature setting. 

4. Push: 

•

 

 to set the change and go back to the live view. 

•

 

 or 

 to set the change and go back to the previous menu. 

•

 

 to cancel the change and go back to the live view. 

Outside/Inside Alarm 

If you set values for the high-temperature color alarm and a low-temperature 
color alarm, the Imager will have the options for inside or outside isotherm color 
alarms. 

To set an outside/inside isotherm color alarm: 

1. From 

the 

Color Alarm

 menu, push 

/

 to highlight 

Outside

 or 

Inside

. 

2. Push: 

•

 

 to set the change and go back to the live view. 

•

 

 or 

 to set the change and go back to the previous menu. 

•

 

 to cancel the change and go back to the live view. 

Shop for Fluke products online at:

1.877.766.5412

www.

MyFlukeStore

.com

Summary of Contents for Ti100





































































Reviews:

No comments

Related manuals for Ti100

Brands by name

Popular brands

Load more brands