Performance Series Thermal Imagers
How to Use the Control Buttons
15
How to Use the Control Buttons
Three function buttons (
,
,
) and four arrow buttons (
,
,
, and
) are the primary controls. These buttons move the cursor
through the menu structure to set the features.
Table 5 is an overview of the buttons and their actions. In live Manual Mode,
the arrow buttons are always active to adjust Level and Span.
Table 5. Overview of Controls
Button Button
Label
/
Action
, Trigger
Cancel
, Trigger
Done (exit from Menu structure)
,
Select or OK
,
Back
,
Move cursor to highlight an option
,
Fast forward/rewind (video mode only)
How to Use the Menus
The menus, coupled with the three function buttons (
,
,
)
and arrow buttons, are the access for thermal image display, camera features,
memory review, and settings for date, time, language, units, file format, and
Imager information.
To open the primary menu, push
or
. The primary menu shows five
secondary menus for Measurement, Image, Camera, Memory, and Settings.
The text above each function button (
,
,
) applies to that
button throughout all menu screens.
Push
to open the primary menu and push
/
to cycle through
the secondary menus. Each secondary menu lists an options menu. Push
/
to cycle through the options.
The primary, secondary, and option menus close 10 seconds after the last push
of a function button. The option selection menu stays open until you make the
selection, go up a menu level, or cancel the action. Table 6 is list of features by
model that you access through the menus.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
