manualshive.com logo in svg

Fluke SMFT-1000, User Manual, Page: 44 / 48

Share
Download
Fluke SMFT-1000 User Manual Download Page 44

SMFT-1000

Users Manual

40

5. Use the 

 to scroll through the tests.

The display shows 

Auto Test Complete

 message and shows the results.

6. Use 

 to scroll through the results.

7. Push 

 to clear the test results and not save.

8. Push 

 to save the results to memory.

A confirmation message with ID number shows on the display and then returns to the test 

screen.

Menu

The Menu function has the options for:

Memory

Device Settings

Help

To open the Menu function:
1. Turn the rotary dial to 

MENU

.

2. Use 

 to highlight a menu item.

3. Push 

 to select the menu item.

Follow the instructions on the display.

Download Test Results

You can download test measurements from the PV Analyzer to a PC for data management 

through the IR port.
To download test measurements with the IR port:
1. Turn off the PV Analyzer.
2. Connect the IR serial cable to the serial port on the PC and the IR port on the PV Analyzer. 

See 

Figure 2

.

Shop for Fluke products online at:

1.888.610.7664

www.

MyFlukeStore

.com

Summary of Contents for SMFT-1000

















































Reviews:

No comments