To prevent possible electrical shock, fire, or personal injury follow these guidelines:
•
Read all safety information before you use the product.
•
Use the product only as specified, or the protection supplied by the product can be
compromised.
•
Do not use the product around explosive gases, vapor, or in damp or wet environments.
•
Carefully read all instructions.
•
Do not use and disable the product if it is damaged.
•
Do not use the product if it operates incorrectly.
•
Do not apply more than the rated voltage between the terminals or each terminal and earth
ground.
•
Do not look directly into the laser with optical tools (for example, binoculars, telescopes,
microscopes). Optical tools can focus the laser and be dangerous to the eye.
•
Do not look into the laser. Do not point laser directly at persons or animals or indirectly off
reflective surfaces.
•
Do not use laser viewing glasses as laser protection glasses. Laser viewing glasses are used
only for better visibility of the laser in bright light.
•
Use the product only as specified or hazardous laser radiation exposure can occur.
•
Incorrect wiring can damage the sensor and void the warranty. Before applying power, make
sure all connections are correct and secure!
•
To prevent possible electrical shock, fire, or personal injury make sure that the sensor is
grounded before use.
•
Have an approved technician repair the product.
•
The metallic enclosure of the sensor is not necessarily earthed by installation. At least one of the
following safety measures must be met to minimize the danger of electrostatic charges:
o
Earth grounding of the cable shield
o
Installing the unit’s metallic enclosure on an earth grounded mounting bracket or on any other
grounded bases
o
Protect the operator from electrostatic discharge
