manualshive.com logo in svg

Fluke 54200, User Manual

Share
Download
Fluke 54200 User Manual Download Page 71

How to Use the Instrument

Operating via Keyboard

4

4-5

Sound Submenu

Figure 4-4. Sound Submenu

• 

Press the 

é 

or 

ê

 softkey (F1 or F2) to select the parameter you want to change.

• 

Press the 

edit

 softkey (F3). A popup menu with the selectable settings appears.

• 

Press the 

é

 or 

ê

 softkey (F1 or F2) to select the required setting.

• 

Press the 

enter

 softkey (F5) to confirm your setting.

• 

Press the 

enter

 softkey (F5) again to return to the 

main

 menu.

Submenu for Digital Services

Figure 4-5. Submenu for Digital Services

• 

Press the 

edit

 softkey (F3). A popup menu with the selectable settings appears.

• 

Press the 

é 

or 

ê

 softkey (F1 or F2) to select the required setting.

• 

Press the 

enter

 softkey (F5) to confirm your setting.

• 

If you select the 

CC

 mode, an additional popup menu appears to select the memory

number or the sequence.

• 

Press the 

enter

 softkey (F5) to confirm your setting.

• 

Press the 

enter

 softkey (F5) again to return to the 

main

 menu.

Sound system:

BTSC *

TV system:

NTSC M

Sound mode:

Mono *

Sound source:

Internal *

Second Audio Program (SAP): Off *
Audio frequency for channel 1: 1.0 kHz *
Pre-emphasis:

75 µs *

Sound carrier frequency:

4.5 MHz

Sound carrier level:

-10 dBc *

* Parameter can be changed in this submenu.

Digital Service:

CC (Closed Caption) *

TV system:

NTSC M

* Parameter can be changed in this submenu.

In the external video modulation mode the
digital services are not available. The display
only shows the selected TV system.

Summary of Contents for 54200



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands