manualshive.com logo in svg

Fluke 54200, User Manual

Share
Download
Fluke 54200 User Manual Download Page 163

Function Reference

Programming the Real Time Clock

5

5-21

• 

Press the 

enter

 

softkey (F5) to confirm your setting of the real time clock.

Figure 5-14. Real Time Clock Setting

54200 including the Teletext option:
The modified time is automatically displayed in the TOP or FLOF teletext pages. In the
Teletext TOP2 and FLOF2 mode the real time clock is additionally used for generating
the Universal Date and Time (UDT) code in Data Packet 8/30 format 1 for PDC (Pro-
gramme Delivery Control).

Remark:

The actual time shown in the 

support

 

submenu is only updated if this submenu is called

up again.

Summary of Contents for 54200



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands