Fluke 2635A, User Manual

Page: 23 / 268

Ten Minute Tour
(continued)
xxi
tRIg
ALAr
On
OFF
SHIFT
MON
CANCL
Selecting Triggering Options. Press the SHIFT
key, release, then press the MON key to open
the TRIGS option menu. A trigger option can
trigger scanning, instead of using the SCAN key.
OFF indicates no triggering option; ON indicates
the external trigger option is active (a contact
closure or voltage transition between pins TR and
on the rear panel ALARM OUTPUTS connector);
ALAr (Alarm) indicates scan triggering when a
monitored channel goes into Alarm. Press
CANCL to exit. [Figure 2-19]
CANCL
SHIFT
LIST
bAUd
38400
...
300
Setting the Communication Parameters.
Press the SHIFT key, release, then press the
LIST key to open the COMM menu. The
communication parameters configure the rear-
panel RS-232 interface for printer and PC
operations. The first selection is bAUd (Baud)
with rates from 300 to 38400 baud. For the
complete procedure, this is followed by parity,
flow control and echo. Press CANCL to exit.
[Figure 5-2]
G
F
op79_7f.eps
Ten Minute Tour (cont)