1587 FC/1587/1577
Users Manual
10
Table 5. Buttons (cont.)
Button Description
158
7 F
C
1
5
87
158
7T
1
5
77
r
Changes Ranging mode from Auto (default) to Manual Ranging mode. Switches between available ranges
in a function. Press and hold to return to Auto Ranging mode.
In Insulation Test mode, switches between available source voltages.
•
•
•
•
Toggles between degrees C and degrees F.
•
•
H
Turns the backlight on and off. The backlight goes off after two minutes.
•
•
•
•
Initiates an insulation test when the rotary switch is on the
INSULATION
position. Causes the Meter to
source (output) a high voltage and measure insulation resistance.
•
•
•
•
G
The blue button functions as a shift key. Press to access blue functions on the rotary switch.
•
•
•
•
Configures the Tester for a polarization index (PI) or dielectric absorption ratio test (DAR).
Press to configure for PI mode, press again to configure for DAR mode.
The test starts when you press the
.
•
•
Turn on the radio and set the Product to the module mode.
shows in the display when the radio is
on.
•
When used with the Fluke Connect App on your smart device, saves a measurement to the Fluke
Connect app.
•
Press >2 s. to turn off the radio and exit the module mode.
•