background image

1000FLT 

Users Manual 

16 

Specifications 

Temperature 

Operating .......................... -10 

°

C to +50 

°

C (+14 

°

F to +122 

°

F) 

Storage ............................. -40 

°

C to +60 

°

C (-40 

°

F to +140 

°

F) 

Relative Humidity

 ................ 85  % 

Operating Altitude

 .............. <2000 m 

Battery 

Type .................................. 4 x AA Alkaline IEC LR6 
Life .................................... 40  hr 

NCV (VoltAlert

)

 ................. 85 V ac to 400 V ac 

45 Hz to 67 Hz 

10 cm (4 in) distance 

Pin Continuity Test

 ............. <1  k

Ω

 

Ballast Test

 .......................... 20  kHz

 

Ballast Type 

Electronic .......................... 20  kHz 
Magnetic ........................... 50 Hz to 60 Hz 

3 m (10 ft) distance 

Drop

 ..................................... 2 meter 

Size (H x W x L)

 ................... 21.5 cm x 3.0 cm x 6.5 cm  

(8.5 in x 1.2 in x 2.6 in) 

Weight

 .................................. 0.37 kg (0.80 lb) 

Warranty

 

Main  Body ......................... 3  years 
Rod  Extender .................... 1  year 

 

Safety

 ................................... IEC 61010-1, Pollution Degree 2

 

Electromagnetic Compatibility (EMC) 

EU ..................................... IEC 61326-1 (Portable) CISPR 11, Group 2, 

Class A.  

 

Group 2 equipment contains all ISM RF 
equipment in which radio-frequency energy 
in the frequency range 9 kHz to 400 GHz is 
intentionally generated and used or only 
used, in the form of electromagnetic 
radiation, inductive and/or capacitive 
coupling, for the treatment of material or 
inspection/analysis purposes. 

 

Class A equipment is suitable for use in all 
establishments other than domestic and 
those directly connected to a low voltage 
power supply network which supplies 
buildings used for domestic purposes. 
Caution, there may be potential difficulties in 
ensuring electromagnetic compatibility in 
other environments, due to conducted and 
radiated disturbances.

 

US (FCC) .......................... 47 CFR 15 subpart B, this product is 

considered an exempt device per clause 
15.103 

Applies to use in 
Korea only (KCC) .............. Class A Equipment (Industrial Broadcasting 

& Communication Equipment).  

 

This product meets requirements for 
industrial (Class A) electromagnetic wave 
equipment and the seller or user should 
take notice of it. This equipment is intended 
for use in business environments and not to 
be used in homes. 

Summary of Contents for 1000FLT



























Reviews: