FW_F113A_v1901_02_EN.docx
Page 24
4.4.6.
TERMINAL CONNECTORS
The following paragraphs describe the terminal connections and configurations that are
specific for types of supply PM, PF, PD and PX in combination with types OA, OT and OR.
For type PD-OS (4 mechanical relay outputs), please consult the addendum to this
manual specific for this type:
‘F1xx-A-PD-OS Addendum / Installation Guide’
For Intrinsically safe applications: read chapter 5.
Refer to Appendix A: Technical Specification
Fig. 8: Overview of terminal connectors - Standard configuration and options
4.4.7.
SENSOR SUPPLY
For type PB/PC; PX; AP:
There is no real sensor supply out available. Only a limited power supply
is available. This power supply MAY NOT be used to supply the flowmeters electronics, converters
etc. as it will not provide adequate sustained power ! All energy used by the flowmeters will directly
influence the battery life-time.
For type PD; PF; PM:
It is possible to supply the sensor with different voltages. You can set the
voltage with the switches. Internal power is not suitable to drive an analog sensor. External power is
only available when the main external power supply is connected.
The sensor supply voltage is selectable: 3; 8.2; 12 or 24V DC.
