HF110AEN_v0501_04
Page 6
Configuration of the unit
The F110-A was designed to be implemented in many types of applications. For that reason, a
SETUP-level is available to configure your F110-A according to your specific requirements.
SETUP includes several important features, such as Span, measurement units, signal settings etc.
All setting are stored in EEPROM memory and will not be lost in the event of power failure or a
drained battery.
To extend the battery-life time (option), please make use of the power-management functions as
described in chapter 3.2.3.
Display information
The unit has a large transflective LCD with all kinds of symbols and digits to display measuring units,
status information, trend-indication and key-word messages.
Flowrate and totals can be displayed either with the small 8mm digits or with the 17mm digits.
A backup of the total and accumulated total in EEPROM memory is made every minute.
Options
The following options are available: isolated or active 4-20mA / 0-10V / 0-20mA analog output, full
Modbus communication RS232/485/TTL (also battery powered), intrinsic safety, mechanical relay or
active output, power- and sensor-supply options, panel-mount, wall-mount and weather-proof
enclosures, flame proof enclosure and LED backlight.