FW-E112-P-MAN-EN_v0101_08
Page 3
ABOUT THE OPERATION MANUAL
This operation manual is divided into two main sections:
The daily use of the unit is described in chapter 2 "Operation". These instructions are meant for users.
The following chapters and appendices are exclusively meant for electricians/technicians. These
provide a detailed description of all software settings and hardware installation guidance.
This operation manual describes the standard unit as well as most of the options available. For additional
information, please contact your supplier.
A hazardous situation may occur if the E112-P is not used for the purpose it was designed for or is
used incorrectly. Please carefully note the information in this operating manual indicated by the
pictograms:
A "
warning
" indicates actions or procedures which, if not performed correctly, may lead to personal
injury, a safety hazard or damage of the E112-P or connected instruments.
A "
caution
" indicates actions or procedures which, if not performed correctly, may lead to personal
injury or incorrect functioning of the E112-P or connected instruments.
A "
note
" indicates actions or procedures which, if not performed correctly, may indirectly affect
operation or may lead to an instrument response which is not planned.
Hardware version:
03.01.xx
Software version:
03.01.xx
Manual :
FW-E112-P-MAN-EN_v0101_08
© Copyright 2014
Fluidwell bv - The Netherlands.
Information in this manual is subject to change without prior notice. The
manufacturer is not responsible for mistakes in this material or for incidental
damage caused as a direct or indirect result of the delivery, performance or
use of this material.
© All rights reserved. No parts of this publication may be reproduced or used
in any form or by any means without written permission of your supplier.
