Fluidwell E112-P, Manual

Page: 14 / 52

FW-E112-P-MAN-EN_v0101_08
Page 14
3.3. OVERVIEW FUNCTIONS SETUP LEVEL
SETUP FUNCTIONS AND VARIABLES
1 TOTAL
1.1 UNIT L - m3 - kg - lb - ton - ft3 - GAL - USGAL - IGAL - bbl - no unit
1.2 DECIMALS 0 - 1 - 2 - 3 (Ref: displayed value)
1.3 K-FACTOR: 0.000010 - 9,999,999
1.4 DECIMALS K-FACTOR 0 - 6
1.5 MULTIPLY FACTOR x1 - x10 - x100 - x1000
2 FLOWRATE
2.1 UNIT mL - L - m³ - mg - g - kg - ton - GAL - bbl - lb - cf - rev - none - scf -
nm³ - nL - P
2.2 TIME UNIT /sec - /min - /hour - /day
2.3 DECIMALS 0 - 1 - 2 - 3 (Ref: displayed value)
2.4 K-FACTOR 0.000010 - 9,999,999
2.5 DECIMALS K-FACTOR 0 - 6
2.6 CALCULATION per 1 - 255 pulses
2.7 CUT-OFF 0.1 - 999.9 seconds
3 DISPLAY
3.1 FUNCTION total - flowrate
3.2 LCD NEW fast - 1 sec - 3 sec - 15 sec - 30 sec - off
3.3 BACKLIGHT 0
%
– 20
%
-40
%
– 60
%
– 80
%
- 100
%
3.4 BARGRAPH disable - enable
3.5 RATESPAN 0000000 - 9999999
4 FLOWMETER
4.1 SIGNAL npn - npn_lp - reed - reed_lp - pnp - pnp_lp - namur - coil_hi - coil_lo –
8.2 DC – 24 DC
5 LINEARIZE
5.1 FREQ. / M-FACTOR 1 0000.1 – 9999.9 Hz / 0.000001 – 9.999999
5.2 FREQ. / M-FACTOR 2 0000.1 – 9999.9 Hz / 0.000001 – 9.999999
5.3 FREQ. / M-FACTOR 3 0000.1 – 9999.9 Hz / 0.000001 – 9.999999
.. .. ……..
5.F FREQ. / M-FACTOR 15 0000.1 – 9999.9 Hz / 0.000001 – 9.999999
5.G LINEARIZATION enable / disable
5.H DECIMALS FREQUENCY 00000 - 1111.1 - 222.22 - 33.333
6 ANALOG
6.1 OUTPUT disable - enable
6.2 RATE-MIN 4mA 0000000 - 9999999
6.3 RATE-MAX 20mA 0000000 - 9999999
6.4 CUT-OFF 0.0 - 9.9%
6.5 TUNE-MIN 0000 - 9999
6.6 TUNE-MAX 0000 - 9999
6.7 FILTER 00 - 99
7 PULSE
7.1 WIDTH 0.000 – 9.999
7.2 DECIMALS 00000 - 1111.1 - 222.22 - 33.333
7.3 AMOUNT 0000000 - 9999999
8 COMMUNICATION
8.1 SPEED / BAUDRATE 1200 - 2400 - 4800 - 9600
8.2 ADDRESS 001 - 255
8.3 MODE Bus rtu – bus asc - off
9 OTHERS
9.1 TYPE / MODEL E112-P
9.2 SOFTWARE VERSION 03:01:xx
9.3 SERIAL NO. -
9.4 PASS CODE 0000 - 9999
9.5 KEYBOARD LOCK enable - disable
9.6 TAGNUMBER 0000000 - 9999999